Granite worktop maintenance
Granite is 100% natural material with unique colour and pattern. Granite quarried in various locations worldwide is used for manufacturing worktops. For that purpose, it is cut in suitable size and its edges and surface are finished.
Granite worktops are durable, heat resistant and last for decades when regularly and properly maintained.
For daily cleaning of granite worktop, we recommend using damp (microfiber) cloth, warm water and either neutral (pH 7), mild alkaline (pH 8-10) or mild acidic (pH 4-6) detergent if necessary. You should prefer cleaning products specially designed for natural stone and avoid using highly acidic or bleach containing cleaning products.
Abrasive materials can also easily damage stone surface – scourer or a grain of sand in the washcloth may cause micro-damage.
Preventing and removing stains
Be sure to protect granite surface from staining and take special caution with worktops made of light rock. Whenever possible, avoid spilling chemicals and corrosive substances on worktop. Also, keep in mind that metal objects may easily scratch polished and leathery surface.
The best way to avoid staining is to remove dirt from worktop immediately, so that it would not dry and absorb in stone. Usually it is sufficient to use paper towel, water and detergent to clean the surface.
The longer the spills remain on granite surface, the more likely it is subject to heavy staining. In case of heavy staining, we recommend using special cleaning products designed for natural stone. Such products are available at local office of Diapol and retail outlets. After using the cleaning product, we recommend to wash the worktop again with clean water and detergent.
Avoiding heat damage and scratches
Although granite is rather scratch resistant, we still recommend using cutting boards. Constant cutting without cutting board will damage both knives and worktop, causing its tarnishing and increasing the risk of staining.
Granite is very heat resistance, but we still recommend using special trivets for kitchenware taken straight from oven or cooktop. These will also prevent potential damage to the worktop, caused by rough-bottomed clay pots.
In order to ensure long-term use, all surfaces are processed with special sealants. This helps to avoid absorption of liquids inside the worktop, thus also preventing potential staining. Based on the type of granite and frequency of use, we recommend re-treating worktops with special sealant for natural stone surfaces at 1-2 year interval. Light granite surfaces should definitely be treated once a year, darker surfaces in every 1-2 years. Suitable product is available at local office of Diapol or retail outlets.